Posted by bob friedl on July 16, 2002 at 16:55:30:
In Reply to: Massey Furgerson # 10 Hay Baler posted by Gwen Smith on July 16, 2002 at 11:45:16:
: We have a MF #10 Baler that we are having problems with.
: Would welcom any advice that you could give me as to how we might be able to correct the problem.
: When baling it will only knot and tie on one side can not seem to get it to tie on the other side. Had a mechanic to come out and look at it, said that he had not work on one that old and could not help cost 200.00 and still no luck. I know it has to be some minor adjustment so if you have the answer that might cure the problem HELP!!!
Try to back off on tractor rpms to about 1950, this should slow down the strokes per minute on the baler. some of the older balers run on fewer strokes than the new ones and the knotters throw an extra loop which goes around the duckbills and will not let it tie properly
Post a Followup